Aeon Matrix launched the original Yardian in 2017 with a strange proposition: Combine a smart sprinkler controller with a home security camera. While the first Yardian was relative well received, the new Yardian Pro simplifies things by ditching the security angle and focusing on irrigation. It’s a capable—if rather confusing—smart sprinkler system. Let’s start with the hardware. This 6 x 6-inch flat-white box is unobtrusive and modern in design, with a slim bar of LEDs indicating zone activity across the middle. It’s one of a few sprinkler devices that would look OK mounted inside your home. (Also worth noting: While the unit is rated for performance in temperatures from -22 degrees Fahrenheit to 140 degrees F, it is not waterproof and can’t be used outside because Yardian does not offer an exterior housing even as an option.) We reviewed the 12-zone model ($200); an 8-zone model ($130) is also available , if you have a smaller irrigation system. Wiring is simple thanks to spring clips that easily connect to the leads, though some of the interior zone clips can be hard to fully depress without a screwdriver or a sharp fingernail. Yardian also includes a sheet of stickers that let you label your zone wires, which is handy. It’s available in 8- and 12-zone configurations, both of which include two optional sensor inputs for rainfall and water-flow measurement. This review is part of TechHive’s coverage of the best smart sprinkler controllers , where you’ll find reviews of competing products, plus a buyer’s guide to the features you should consider when shopping for this type of product. The Wi-Fi in the Yardian Pro is said to be updated since the previous model, now offering “4x more powerful” wireless capabilities; note, however, that it can join only 2.4GHz networks. An ethernet port is also available if you want to hardwire the unit to your router, as is a USB port, if you want to bypass the LAN altogether and connect directly to a cellular data network with a dongle. We all hate wall warts, but having the power supply in line with the cord means its weight could be left dangling from the Yardian Pro unless you mount it relatively low on the wall. My only complaint about the hardware is that rather than using a transformer that attaches to the wall, Yardian relies on a power adapter that resides in the middle of the electrical cable (similar to a typical laptop power adapter). Depending on where your device is mounted, this might mean the adapter will hang suspended in the air, dangling from the Yardian unsupported. After hardware installation, you turn to the Yardian app, which requires registration and email confirmation before you can get going. Setup requires you to enter an equipment ID that is printed near the wire terminals to pair the device to your account. If you’re an iPhone user, the app then directs you to iOS Home and a HomeKit tag scan to complete the registration […]
Spread the love!